Skip to main content
  • Contact & Enquiry
    Contact & Enquiry

RÖDER Floor Systems

The Röder flooring systems form the stable and robust foundation for all RÖDER tent and Hall systems. Especially in the case of sensitive or unstable ground, an anchor-free or protective base is available. The flooring systems that the Röder Group offer here, give a simple and effective solution. The wear-resistant and easy to clean surfaces meet hygienic requirements and are visually, technically and economically appealing. For each request, ground condition and the respective tent and Hall system, the Röder Group has the appropriate solution. The systems are flexible, modular and easy to transport. For the variants of soil systems include the wood floor ‘easy’, wooden floors with a timber substructure, wooden floors with steel substructure, cassette floors, compact floor as well as the heavy load floor. These can be equipped with an additional covering to give a refined finish. The portfolio ranges from PVC, carpet, laminate flooring or wooden tiles, to industrial floors. See you in a personal conversation to discover which floor system best meets your needs. Your Röder Team will be happy to advise you on your individual requirements!

Wood Floor - EASY

The wooden floor boards are from planed pine boards with tongue and groove. With 2.2 cm thick floor boards, this design offers stability, security and protection. The underside is a hardwood bar to complete the board construction, this increases the load capacity of the wooden floor system. The extrusion on the ends of the floor are smooth and at the joins of the board is an extrusion that the boards slot into. In the wooden floor ‘easy’, first the tent and Hall construction are installed. This is followed by the floor system. Excluded are the highlights of the Roeder C-TENT series. Here, you can click on a foot adapter can be used.

Technical Data

• wood boards made of spruce wood
• Aluminum extrusions
• special equipment • chamfered start profile
• material description • anodized aluminium extrusions
• impregnated spruce wood with tongue and groove
• wood thickness: 2.2 cm
• at the ends of grooves
• cross plates made of hard wood
for spans • 300 - 1.000 cm
board size 300 x 0,50 cm
• 500 x 0,50 cm
height • 4.5 cm
load capacity • 500 kg/m²
Surface Weight • 14 kg/m²
Baseplate adapter • NO
INSTALLATION • Only Röder tent and Hall system, then wood floor
applications
• P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS

Wood Floors with a Timber Substructure

The wood floor plates are made from planed pine boards with tongue and groove. With 2.2 cm thick floor boards, this design offers the stability, security and protection. The underside is a hardwood bar to complete the board construction, this increases the load capacity of the wooden floor system. The wooden boards on the edges are smooth and at the end are routed to fit the slot in the aluminium extrusion. With the substructure of treated hard wood, the front of the tent or hall system needs to be installed can be compensated for unevenness. The resulting cavity can be used as a supply network for cables or hoses.

Affordable Alternative

Technical Data

Standard scope of delivery • wood boards made of spruce wood
• aluminium Extrusions
• timber beams as a substructure option
material description • anodized aluminium extrusions
• impregnated spruce wood with tongue and groove
• wood thickness: 2.2 cm
• at the ends of grooves
• cross plates made of hard wood
for spans • 300 - 6,000 cm
board size • 300 x 0,50 cm
• 500 x 0,50 cm
Height • 2.0 cm
load capacity • 500 kg/m²
Surface Weight • 14 kg/m²
Baseplate adapter • YES (P-TENTS/C-TENTS), NO (W-TENTS/H-TENTS/B-TENTS)
INSTALLATION • Only Röder tent and Hall system, then wood floor
applications • P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS

Wooden Floors with Steel Substructure

The substructure of hot-dip galvanized steel profiles can be installed quickly and easily. With the appropriate foot adapter for the respective RÖDER tent and hall system, a static unit is created, which can be installed without anchoring using the inbuilt ballast weights. The wooden floorboards are made of planed spruce boards with tongue and groove. With 2.2 cm thick floor boards, the construction provides stability, safety and protection. As a safety device, a hardwood strip is installed, which is connected by means of screws. This increases the resilience of the wooden floor system. The plates are smoothed at the ends of the sides and are routed at the end of the board to insert them into the aluminium extrusions.

Wooden Floors with Steel Substructure

Technical Data

Standard scope of delivery • Spruce wood panels
• Aluminium extrusions
• Steel support system as a substructure
• Foot adapter for the corresponding RÖDER tent or hall system
Special equipment • Ballasting weights
Note • Ballasting weights are possible for RÖDER tent and hall systems up to a span of 1,000 cm.
Material description • Anodised aluminium extrusions
• Base made of hot-dip galvanized steel profiles
• Foot adapter made of hot-dip galvanized steel
• Impregnated spruce wood with tongue and groove • Wood thickness: 2.2 cm; Grooved ends
• Base of board made of hardwood
Spans • 3,00 – 60,00 cm
Board size • 300 x 0,50 cm
• 500 x 0,50 cm
Construction height • 13.2 cm
Load capacity • 350 kg / m²
Surface weight • 23 kg / m²
Foot adapter • yes
Installation • First RÖDER FLOOR-SYSTEM, then RÖDER tent and hall system
applications • P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS

Cassette flooring

The cassette floor is a high-quality and visually pleasing floor system. The floor cassettes are connected to the joint by an intermediate profile and do not have to be additionally supported due to the inherent stability. The cassette floor can be easily installed by hand. To improve the stability and to reduce the risk of slipping, the floor plates have a surface of non-slip plywood. With the appropriate foot adapter for the respective RÖDER tent and hall system, a static unit of cassette floor and tent construction is created.

Weather resistance and high quality

Technical Data

Standard delivery • Aluminium cassette with non slip Plywood surface.
• Aluminium rails
• Aluminium frame
• Foot adapter for the corresponding RÖDER tent or hall system
Special equipment • Aluminium cassette with Plywood Surface plate or aluminum plate
Note • Slip-resistant and easy-to-clean surface, mainly used in kitchens, catering and medical areas.
Material description • Anodized aluminium extrusion
• Anodized aluminium frame
• 1.2 cm non-slip Plywood, screwed in aluminium frame
For spans • 300 - 6,000 cm
Plate size • 200 x 100 cm
• 250 x 125 cm
• 300 x 100 cm
• 500 x 100 cm
Construction height • 6.0 cm
Load capacity • 350 kg / m²
Surface weight • 18 kg / m²
Foot adapter • yes
Installation • First cassette floor, then RÖDER tent and hall system
applications • P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS

Compact Floor

The patented and certified compact flooring can be used for all tent and hall systems with a grid of 300 or 500 cm. The 2.2 cm thick floor panels are directly screwed to the frame profile and are easy to install and quick to install. The compact floor can be installed anchoring-free up to a span of 2,000 cm. The flooring requires some additional ballast (optional) from 1,500 cm. With the appropriate foot adapter for the respective RÖDER tent and reverberation system, a static unit of compact floor and construction is created.

Uncomplicated installation by simple hooking

Technical Data

Standard scope of delivery • Steel frame with base plate
• Frame connections made of steel profiles for easy mounting
• Aluminium frame
• Foot adapter for the corresponding RÖDER tent or hall system
Special equipment • Ballasting weights for spans over 2,000 cm
Note • Suitable for all RÖDER tent and hall systems with 300 or 500cm bay distance.
Material description • Hot-dip galvanized steel profile profiles
• 2.2 cm thick and multiple glued wooden panel
• Foot adapter made of hot-dip galvanized steel
For spans • 300 - 6,000 cm
Plate size • 2,50 x 1,00 cm
• 2,00 x 1,00 cm
• 1,50 x 1,00 cm
Construction height • 6.0 cm
Load capacity • 500 kg / m²
Surface weight • 30 kg / m²
Foot adapter • yes
Installation • First Compact Floor, then RÖDER Tent and Hall System
applications • P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS

Heavy Duty Floor

The heavy load floor can only be installed by machine. The standard forklifts for installation as well as for logistics and transport are used to manoeuvre each floor panel. The individual floor panels are connected by means of underlaid connecting plates. Additional substructures are necessary every 250 cm to avoid vibrations and to allow higher pressure loads. Due to the high stability, the heavy-load floor can easily be operated with heavy equipment up to 3.5 tonnes. This offers many advantages for use in event, industry and exhibition areas. A static unit is created with the appropriate foot adapter for the respective RÖDER tent and hall system.

For demanding and large-scale projects

Technical Data

Standard scope of delivery • Steel frame with screwed base plate
Special equipment • Ballasting weights for spans over 2,000 cm
• Foot adapter
Note • Can only be installed by machine (eg crane, forklift, etc.)
Material description • Hot-dip galvanized steel profile
• 2.1 cm floor plate, screwed in steel frame
For spans • 1,000 - 6,000 cm
Plate size • 500 x 250 cm
• 1,000 x 250 cm
Construction height • 10,0 cm
Load capacity • 500 kg / m²
Surface weight • 50 kg / m²
Foot adapter • yes
Installation • First heavy load floor, then RÖDER tent and hall system
applications • P-TENTS
• C-TENTS
• W-TENTS
• H-TENTS
• B-TENTS
 
© 2017 RÖDER Zeltsysteme und Service GmbH A company of RÖDER Group